All-Power APG3001 Owner's Manual download pdf (Page 22)

3.5KW Generator

Installation (cont’d)

Support and Mounting

Mount the generator on a concrete slab capable of supporting the weight of

the generator. The slab must extend on all sides beyond the frame by at

least one foot. Contact a cement contractor for slab specifications if

necessary. Attach the frame to the concrete slab using 3/8” diameter

expansion anchor bolts (not supplied).

Grounding

Connect a #6 AWG grounding wire (not included) from the ground

connector (8) on the generator to a grounding rod (not included) that has

been driven at least 24 inches deep into the earth. The grounding rod must

be an earth-driven copper or brass rod (electrode) which can adequately

ground the generator.

Note: It is recommended that only a trained and licensed

electrician perform this procedure.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30

No comments

All-Power APG3001 Owner's Manual Page 22